1
2
3
4
Advanced Fax Functions
Scan Related Settings 4-9
If you want to scan another document, repeat steps 6 to 7.
8
When you have finished scanning all the documents, press [Tx Start].
9
Transmitting Both Sides of the Document (Duplex Scan)
You can transmit both sides of a document.
This setting is only available with the ADF.
Load the document on the ADF, and press <Fax>.
1
Press
2
the [Advanced] tab.
Select [DuplexScan].
3
Select [Long Edge] or [Short Edge], and press [Enter].
4
To confirm the binding type of your document, see page 2-13.
Specify the destination, and press <Start>.
5
For details on specifying the destination, refer to “Specifying Destinations”. (See page 5-2.)
To Next Page
Loading...
Need help?
General
