1
2
3
Basic Fax Functions
Basic Faxing 3-21
Press <Start>.
6
If you loaded the document in the ADF, this concludes the procedure.
If you loaded the document on the document glass, load the next document, and
7
press [Next Doc].
Press [Tx Start] to start transmission.
Repeat step 7 to scan all the documents.
8
To finish scanning, press [Tx Start].
For details on canceling transmission, refer to “Canceling / Checking Faxes”. (See page
3-26.)
Basic Transmission Settings
You can set the resolution and contrast in accordance with the document and its text, and
insert a dial number.
You can also change the default settings, as necessary. (See page 7-43.)
Setting the Resolution
Set the resolution to scan with according to the document.
•
Normal: Select to scan a document with normal text.
•
Fine: Select to scan a document with small text, such as a newspaper.
•
S-Fine: Select to scan a document with detailed illustrations or fine text.
•
Photo: Select this to scan photos.
•
Background: Select this to scan while erasing the background (background pattern or color) of the
document.
Load the document, and press <Fax>.
1
Press the [Address Book] tab or the [Num. keys] tab.
2
To Next Page
Loading...
Need help?
General
