2-30 Advanced Scan Features
Selecting the File Format (File Format)
You can select the file format (TIFF, PDF, etc) for sending.
Available File Formats
For monochrome scanning: TIFF, PDF, or encrypted PDF
For color scanning: JPEG, PDF, or encrypted PDF
Encrypted PDF Settings
When you have selected encrypted PDF for the file format, you can also specify the
following settings.
Item Description
Encryption Level
*1
Select Low (40-bit RC4), High (128-bit RC4), or High (128-bit AES).
Printing Allowed Select whether to allow the file to be printed.
Editing Allowed Select whether to allow the file to be edited.
Copying Allowed Select whether to allow the file to be copied.
Open Password If you set this password, the password must be entered when opening
the created PDF file.
Up to 28 alphanumeric characters and symbols can be entered for the
password.
Set the password after pressing <Start>.
Permissions Password If you set this password, the password must be entered when printing
or editing the created PDF file. The operations for which the password
is required can be set in Printing Allowed, Editing Allowed, and Copying
Allowed.
Up to 28 alphanumeric characters and symbols can be entered for the
password.
Set the password after pressing <Start>.
The encryption levels in order of strength are Low (40-bit RC4), High (128-bit RC4), and *1
High (128-bit AES).40-bit RC4 is supported by Acrobat 4.0 (PDF 1.3) or later, 128-bit RC4 is
supported by Acrobat 6.0 (PDF 1.5) or later, and 128-bit AES is supported by Acrobat 7.0 (PDF
1.6) or later.
This function can be used in the following cases:
Scan to e-mail•
Scan to PC Folder•
Scan to FTP Server•
Scan to USB Memory•
Load the document, and press <Scan>.
1
Press the [Advanced] tab.
2
To Next Page
Loading...
Need help?
General
