Muratec MFX-2590 - Operations During Reception

3-34 Basic Faxing
Setting the Reception Method

In addition to setting the reception mode, you can also set manual reception or automatic
reception on the screen.
• Auto reception: This method automatically receives faxes. For details, refer to “Auto Reception
for Fax Only (Fax Ready)”. (See page 3-31.)
•
Manual reception: This method receives faxes after <Start> is pressed. For details, refer to
“Primarily Using the Phone (Tel Ready)”. (See page 3-33.)
Press <Fax>.
1
Press the [Advanced] tab.
2
Press [Auto Rx].
3
Select [ON] or [OFF] , and press [Enter].
4
Select [ON] to set automatic reception or [OFF] to set manual reception.
Operations During Reception
The information lamp on the control panel flashes during reception. When out-of-memory
reception is performed, the information lamp is illuminated.
Information lamp