2-36 Advanced Scan Features
Select the document category that you want to use.
5
Edit the document category, as necessary, and press [Enter].
6
For details on entering characters, refer to Chapter 1, “Entering Characters” in the •
Administrator’s Guide.
If you do not want to edit it, proceed to step 7.•
Specify the destination, and press <Start>.
7
For details on the procedure, refer to “Scanning to a User”. (See page 1-7.)
Setting the Hold Time (Hold Time)
You can set the storage period (hold time) for documents saved in a box.
This function can be used with Scan to Box.•
You can set a storage period of 1 to 99 days, or unlimited. The day the data is saved •
is not included in the storage period. This means that if you set a storage period of
one day, the data will be stored until the day after the data was saved.
Load the document, and press <Scan>.
1
To Next Page
Loading...
Need help?
General
