Muratec MFX-2590 - Adding Comments (Comments)

2-38 Advanced Scan Features
Adding Comments (Comments)
You can enter comments for documents saved in a box.
Note
This function can be used with Scan to Box.
Load the document, and press <Scan>.
1
Press the [Advanced] tab.
2
Press [Comments].
3
Enter the comments, and press [Enter].
4
Up to 1024 characters can be entered.•
Press [ViewText] to confirm the mail text that has been entered. Press [Edit] to return to the •
entry screen.
For details on entering characters, refer to Chapter 1, “Entering Characters” in the •
Administrator’s Guide.
Specify the destination, and press <Start>.
5
For details on the procedure, refer to “Scanning to a User”. (See page 1-7.)