Muratec MFX-2590 - Duplex Scan

2-12 Advanced Scan Features
Press [Next Doc] or <Start>.
7
When the loaded documents have been scanned, the message “Set next document” is
displayed.
If you want to scan another document, repeat steps 6 to 7.
8
When you have finished scanning all the documents, press [Complete].
9
Duplex Scan
You can easily scan a two-sided document using this mode. Just load the duplex document
in the ADF, and press <Start>.
Load the document in the ADF, and press <Scan>.
1
Press the [Advanced] tab
2
.
P
3
ress [Duplex Scan].