3-60 Internet Fax Transmission (Internet Fax)
Press [Mail Address].
3
Enter the e-mail address, and press [Enter].
4
To send to the destination machine without going via a mail server, enter an IP address.•
To specify multiple destinations, repeat steps 3 to 4.•
Up to 50 characters can be entered for an e-mail address.•
Destinations can also be specified using other methods. For details, refer to “• Specifying
Destinations”. (See page 5-2.)
Press <Start>.
5
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and press [Next •
Doc]. Press [Tx Start] to start transmission.
To Next Page
Loading...
