Press the [PC/USB] tab, and then [User].
3
Specify the destination.
4
To specify a user group, press the [Group] tab and then specify the group.•
If destinations are registered in the [Faves Destination] tab, you can also select a destination •
from the [Faves Destination] tab.
If you loaded the document in the ADF, this concludes the procedure.•
If you loaded the document on the document glass, load the next document, and
5
press [Next Doc].
To finish scanning, press [Complete].
Repeat step 5 to scan all the documents.
6
To finish scanning, press [Complete].
You can register often-used destinations in the [Faves Destination] tab. (See page
7-31.)
To Next Page
Loading...
