1
2
3
4
Advanced Fax Functions
F-Code Communications 4-35
Press [Close].
21
To continue to register or edit F-code bulletin
boxes, repeat the procedure in steps 4 to 20.
Deleting F-Code Boxes
Press <Setting>.
1
Press the [Resister] tab.
2
Press [F-Code Box].
3
Select the box you want to delete, and press [Delete].
4
If an I.D. code is set, enter the I.D. code using the numeric keys, and press
5
[Enter].
If an I.D. code is not set, proceed to the next step.
Press [Yes].
6
Press [No] to close the screen without deleting the box.•
To continue to delete F-code boxes, press [Enter], and repeat the procedure in steps 4 to 6.•
To Next Page
Loading...
Need help?
General
