4-38 F-Code Communications
Enter the sub-address registered in the other machine using the numeric keys.
6
Up to 20 digits can be entered for a sub-address.•
To delete one of the entered characters, press [Clear].•
To delete all of the entered characters, press [All Clear].•
If a password is set, press the password entry box.
7
If a password is not set, proceed to step 9.
Enter the password using the numeric keys.
8
Up to 20 digits can be entered for a password. Numerals, # and * can be entered.
Press [Enter].
9
Press [F-Code Tx] again to return to the screen in step 4, where you can correct the sub-
address and/or password if entered incorrectly.
Specify the destination, and press <Start>.
10
For details on specifying the destination, refer to “Specifying Destinations”. (See
page 5-2.)
F-Code Polling
Enter the sub-address and password to retrieve (polling) the documents stored in another
machine’s bulletin box. First check the sub-address and password of the bulletin box in
the other machine.
Press <Fax>.
1
Press the [Advanced] tab.
2
Press [F-Code Polling].
3
To Next Page
Loading...
Need help?
General
