6-12 Managing the Communication History
Reception Journal•
Example Print
Number Item Description
1 No. The job number
2 Destination The sender’s name or fax number
3 Mode The resolution used for the communication
4 Start Time The time the communication started
5 Time
The time that elapsed from when the communication started
until when the communication ended
6 Page The number of pages transmitted
7 Result
OK: Completed normally
*: ECM Mode reception
#: Super G3 reception
Code: The communication error code
*1
8 Note
The type of communication is printed for the following types
of communication: Nothing is printed for other types of
communication.
• Manual Rx
• Polling Rx
• F-code polling Rx
• Received in F-code Secure Box
• Received in F-code Bulletin Box
9 Printed date
*2
The date and time that the journal report was printed
10 −
The date and time that the journal report was printed, or the
date and time that communication history started to be stored
for a daily communication report
When a communication error code is printed, confirm the content of the error and perform the *1
transmission again. For details, refer to Chapter 4, “Error Messages” in the Administrator’s
Guide.
Only printed for a daily communication report.*2
To Next Page
Loading...
Need help?
General
