86
• TO RESTORE PERSONAL SETTINGS
DT730/DT710 Series user can restore the personal
settings of DT Series. To download the backup file to
the telephone, the DT Series needs to be connected to
the network that has FTP (TFTP server).
Before starting the download, an IP Address of the
FTP/TFTP Server must be entered from DT Series.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the backup file you want to restore into
the designated directory (for Windows IIS,
the default is “C:\InetPub\ftproot) of the FTP
server.
<TFTP server>
Put the backup file you want to restore into a
desired directory of TFTP server and then
specify it as the directory for downloading.
STEP 2: Select Setting (DT730) / Setting
(DT710) on the Menu screen.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key (DT730) / key (DT710)
STEP 3: Select Data Backup/Restore.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
STEP 4: Select Protocol.
Select an item by either of the following operations.
• Highlight an item by using , and then press ,
or OK soft key.
• Press key.
Note:
For details on the FTP/TFTP service, contact the
System Administrator.
To Next Page
Loading...
Need help?
General