CHAPTER 3 SYSTEM DATA PROGRAMMING
– 98 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
Assign a data path between the CSH and the
CSI. D channel Block number is used to assign
the control data path between the CSH and
CSI.
One CSH has four D channel Blocks. One D
channel Block controls one CSI (PN-2CSIA-
A/PN-2CSIH), two D channel Blocks control
one CSI (PN-4CSIA).
•
(1)
(2)
Y=18
XX ZZ
XX: 04-15, 20-31: AP No. assigned by
CM05 Y=0
ZZ : 00-03: D Channel Block No.
000-255: CS No. of PN-2CSIA, PN-
2CSIH, PN-4CSIA-A assigned
by CM14
CCC : Clear
NOTE 1: When mounting PN-2CSIH, assign
the CS number of the first LEN (Lev-
el 0) of each LT slot.
NOTE 2: When mounting PN-4CSIA-A, as-
sign the CS number of the first LEN
(Level 0) of PN-4CSIA-A card
mounting slot and the adjoining
right side slot.
A
CM06
B
CS DATA PROGRAMMING
To Next Page
Loading...
