CHAPTER 3 SYSTEM DATA PROGRAMMING
– 99 –
NWA-008855-001 Rev.1.0
avch3001.fm
DESCRIPTION DATA
Assign an area to be called to each CS.
NOTE: Confirm that the busy LED lamp on
CSI card is flashing (60 IPM).
•
(1)
(2)
Y=00
000-255: CS No.
XX Y ZZ
XX : 00-31 (Calling Area No.)
Y : 0-7 (Group No.)
ZZ : 00-31 (Group CS No.)
CCC: Clear
Example of CMAD Y=00 data setting
• Calling Area: A, B
• Number of CS: 32 (Calling Area A)
35 (Calling Area B)
Calling Area A
CMAD Y=00
(1) 000 (2) 00000
(1) 031 (2) 00031
Calling Area B
CMAD Y=00
(1) 032 (2) 01000
(1) 063 (2) 01031
(1) 064 (2) 01100
(1) 066 (2) 01104
When there are more than 32 CSs in one calling area, divide the CSs into groups by group number.
For group CS number, assign CS number (00-31) to each CS per group.
B
CMAD
Calling Area No. 0
Group No. 0
Calling Area No. 1
Group No. 1
Calling CS No. 0
C
CS DATA PROGRAMMING
To Next Page
Loading...
