CHAPTER 3 SYSTEM DATA PROGRAMMING
– 140 –
NWA-008855-001 Rev.1.0
avch3001.fm
• To display an ATTCON number for PS-display, do the following programming.
DESCRIPTION DATA
Assign the ATTCON number for PS-display to
the ATTCON number assigned by CM14/
CM10.
NOTE: To call the destination by a calling
name/number display feature easily,
we recommend the access code for
operator call assigned by CM20 to
be set to the second data.
•
(1)
(2)
Y=51
0-7: ATTCON No. assigned by CM14/
CM10
X-XXXXXXXX: ATTCON No. for PS-
Display
Assign the access code for an operator call. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
800: Operator Call
Assign the access code for Individual Atten-
dant Access.
•
(1)
(2)
0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A095: Individual Attendant Access
Assign the access code for Priority Calls 0 and
1 respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A088: Priority Call 0
A089: Priority Call 1
Assign the access code for Special Operator
Call 0-3 respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A090-A093: Special Operator Call 0-3
Assign the access code for Emergency call. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A094: Emergency Call
START
CM60
CM20
END
WCS FEATURE PROGRAMMING
To Next Page
Loading...
