EasyManua.ls Logo

NEC NEAX 2000 IPS - Page 30

NEC NEAX 2000 IPS
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 1 GENERAL INFORMATION
– 20 –
NWA-008855-001 Rev.1.0
avch1001.fm
WCS Card Name and Function
NOTE 1: IP-PAD (PN-32IPLA) card and 16VCT (PN-16VCTA) card do not support FAX relay.
NOTE 2: When using G.723.1, 5.3 Kbps is available for the receiving bit rate.
CARD
NAME
FUNCTIONAL
NAME
FUNCTION
PN-32IPLA/
PN-32IPLA-A
IP-PAD 32-channel IP-PAD Card
Provides LAN Interface, Packet Assembly/Disassembly to
accommodate Legacy Line/Trunk interface.
Provides voice compression DSP control functions such as voice
compression control, DTMF relay.
Voice compression protocol: G.711 (64 Kbps)
FAX protocol: Pass-through (G.711) NOTE 1
Provides Auto Negotiation function (Set to ON/OFF by the
switch setting).
Used together with maximum two 16VCT cards.
Two cards can be accommodated per built-in FP/FP card, maxi-
mum 8 per system.
10BASE-T/100BASE-TX twisted pair cable is connected directly
to this card.
PN-16VCTA/
PN-16VCTA-A
16VCT 16-channel CODEC Card for 32-channel IP-PAD Card
Provides voice compression DSP control functions such as voice
compression control, DTMF relay and FAX relay.
Voice compression protocols:
G.711 (64 Kbps), G.723.1 (5.3 Kbps/6.3 Kbps), G.729a
(8 Kbps) NOTE 2
FAX protocol: T.30, Pass-through (G.711, G.726) NOTE 1
Used together with IP-PAD (PN-32IPLA/PN-32IPLA-A) card.
Two cards can be accommodated per IP-PAD (PN-32IPLA/PN-
32IPLA-A) card, maximum 16 per system.
Continued on next page
CARD NAME AND FUNCTION

Table of Contents

Other manuals for NEC NEAX 2000 IPS

Related product manuals