NEC Univerge SV9300 - Page 56

TERMINAL SETUP
48
15. Select “ Download Address”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
16. Enter an IP address/address (URI) of
the FTP/TFTP/HTTPS server which
stores the download file.
Enter the IP address of FTP/TFTP/HTTPS
server with digit keys. Use for
separator of IP address.
 After entering an IP address, press
or Soft key (OK).
The display goes back to the [Download
Menu] screen.
To enter the address (URI) of
FTP/TFTP/HTTPS, press Soft key
(IP/URI) to switch the display to the URI
input screen.
 Press Soft Key (IP/URI).
 By using the Dial keys, enter the
address (URI) of the server where the files
are stored.
Please refer to INPUT CHARACTERS
for how to enter the character.
 After entering addres (URI), press
or Soft key (OK).
The display goes back to the [Download
Menu] screen.
The IP address input screen can be
switched to URI input screen by the Soft
key (IP/URI).
 Press Soft Key (IP/URI)
 Press Soft Key (IP/URI) again to
go back to the IP address input
screen.
17. Select “ Download Files”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
18. Select a file to be downloaded.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press or .
According to the selected item in the
[Download Files], proceed to the following