NEC Univerge SV9300 - Page 57

TERMINAL SETUP
49
steps below.
 Select “ Hold Music” and go to 20.
 Select “ Ring Tone” and go to 19.
Directory file cannot be downloaded.
19. Select between Music Ring 1-3.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press - .
20. Enter the file name with digit keys.
The default file name is displayed.
 Press Soft key (BK) once to delete the
default file name.
 Enter the file name that is downloaded.
Please refer to INPUT CHARACTERS
for how to enter the character.
Up to 20 characters can be entered as
a file name.
21. Press Soft key (Exec).
Downloading is started.
After the downloading process is
complete, the display changes as follows.
22. Press Soft key (Exit).
The display goes back to the [Download
Menu] screen.
When the downloading process ends in
failure, “Downloading Failed!” is
displayed on the LCD. Check to see the
following points and retry download.
CHECK POINTS
ACTIONS
Check whether the
download file is placed
in the folder of the
server or not.
Place the download
file in the specified
folder of the server.
Check if the file name
you entered is match
with that stored in
FTP/TFTP/HTTPS
server.
Enter the correct file
name which is stored
in FTP/TFTP/HTTPS
server.
Check whether IP
address/address (URI)
of FTP/TFTP/HTTPS
server is correct or not.
Set the proper IP
address/address
(URI) of
FTP/TFTP/HTTPS
server.