NEC Univerge SV9300 - Page 61

TERMINAL SETUP
53
The IP address input screen can be
switched to URI input screen by the Soft
key (IP/URI).
 Press Soft Key (IP/URI)
 Press Soft Key (IP/URI) again to
go back to the IP address input
screen.
17. Select “ Data Backup”.
Select one of the following operations.
 Highlight an item by using , and
press , or Soft key (OK).
 Press .
18. Enter the file name by digit keys.
The default file name is displayed.
 Press Soft key (BK) once to delete the
default file name.
 Enter the file name that is Backup.
Please refer to INPUT CHARACTERS
for how to enter the character.
Up to 20 characters can be entered as
a file name.
When you send to the server the date
from a terminal,it is possible to select
the file format with encryption.
Press Soft Key (Enc) to send the file
with encryption.
Press Soft Key (No Enc) to send the file
without encryption.
Do not change the extension of backup
file. The setting data of the terminal can
only be backed up as a (.tgz) / (.tgz.ef)
file.
19. Press Soft key (Exec).
A Backup is started.
A backup is completed.
20. Press Soft key (Exit).
The display goes back to the
[Backup/Restore] screen.