How to Set the Automatic Date Advance Feature
To set the auto date advance time and days:
1. As supervisor (see How to Log in as Supervisor on page 218 ):
From the main menu, type 3.3.4 or select the path:
Default user settings Default imprint parameters Automatic date ad-
vance
The Automatic date advance screen is displayed.
2. Press the Auto Date Advance button to Active status.
3. Enter the Automatic Date Advance time (00:00 hours is not allowed).
4. Select Day to gain access to working days selection screen.
5. Select the day by pressing on the corresponding button.
6. Press [OK] to exit.
224
| Page 224 | mrt-11-2014 04:31 |
8
Configuring the System
To Next Page
Loading...
Need help?
General
