Time and Date Management
The time and date are required for postage and are provided by the postal authorities. As
a result, you cannot manually adjust the machine time and date.
However, you can ask the machine to check the current time and date and display them.
See also
•
Automatic Date Advance on page 223 .
Checking/Adjusting Time and Date
To check the time and date, make sure the connection to the Postal
Services is available. See How to Set the Postal/Online Services
Connection on page 261 .
How to Check/Adjust the Machine Time and Date
To check/adjust the current time and date:
1. As supervisor (see How to Log in as Supervisor on page 218 ):
From the main menu, type 6.4 or select the path:
Machine settings Machine date and time
The machine adjusts its time if necessary and displays time and date values.
If you are processing postage at the time when the clocks adjust
for daylight savings time, the Mailing System will wait until you are
finished before displaying the new time.
8
Configuring the System
259
| Page 259 | mrt-11-2014 04:31 |
To Next Page
Loading...
Need help?
General
