Safety Requirements1.2
Please read this section carefully before connecting or using your equipment.
Power Connection
Before powering up your Mailing System, please check to ensure the system meets your
local AC voltage requirements. For information on power specifications, please refer to the
plates at the back of each System component.
In addition to checking the power requirements, we also recommend that you:
•
Use an outlet that is easily accessible.
•
Do not route the power cord between pieces of furniture or over sharp edges.
•
Avoid using outlets controlled by wall switches or shared by other equipment.
•
Make sure there is no strain on the power supply cord.
THIS EQUIPMENT MUST BE GROUNDED
•
Only connect the power plug to an outlet provided with a
protective ground contact.
•
To reduce the risk of fire, use only the power cord supplied
with the mailing system.
•
Do not use ground adaptors.
•
Do not use this product on a wet floor or near water.
•
In case of liquid spillage, disconnect the power cord from the
outlet and proceed to cleaning.
To reduce the risk of fire, only connect the modem to the telephone
line using supplied cable (see System Specifications on page 327
).
6
| Page 6 | mrt-11-2014 04:31 |
1
Read this First
To Next Page
Loading...
Need help?
General
