Maintaining the Sealer Water
Network
10.2
The automatic Feeder uses water for sealing envelopes. If the system is out of water, the
mailing process continues but the envelopes will not be sealed properly.
Filling the Sealer Bottle
How to Fill the Sealer Bottle
To add water:
1. Remove the bottle from its base and turn it over.
2. Unscrew the cap and fill the bottle with water up to the limit marks.
3. Screw on the cap and put the bottle back into place.
302
| Page 302 | mrt-11-2014 04:31 |
10
Maintenance