How to Set the Default Printing Offset
To change the default printing offset:
1. As supervisor (see How to Log in as Supervisor on page 218 ):
From the main menu, type 3.2.4 or select the path:
Default user settings Base settings Print offset
2. Select No offset, Offset 1 - 5 mm or Offset 2 - 10 mm.
3. Press [OK] to validate.
Selecting a Default Label Printer
You can select the default label dispenser as follows.
How to Select the Default Label Printer
To select the default label printer:
1. As Supervisor (see How to Log in as Supervisor on page 218 )
From the main menu, type 3.2.7 or select the path:
Default User settings Base settings Default label printer
2. Select the label printer.
3. Press [OK] to validate.
234
| Page 234 | mrt-11-2014 04:31 |
8
Configuring the System
To Next Page
Loading...
Need help?
General
