1 Safety Recommendations
Ensure that this product is used in compliance with the requirements of the country and the
environment. Please read the following safety recommendations to avoid body hurts or damages of
product or workplace:
⚫
Do not use this product at any places with a risk of fire or explosion such as gasoline stations, oil
refineries, and so on.
If the product is used in a place with flammable gas or dust such as propane gas, gasoline, or
flammable spray, the product will cause an explosion or fire.
⚫
Do not use this product in environments such as hospital or airplane where it might interfere with
other electronic equipment.
If the product is used in medical institutions or on airplanes, electromagnetic waves emitted by
this product may interfere with surrounding equipment.
Follow the requirements below in design and use of the application for this module:
⚫
Do not disassemble the module without permission from Neoway. Otherwise, we are entitled to
refuse to provide further warranty.
⚫
Design your application correctly by referring to the HW design guide document and our review
feedback on your PCB design. Connect the product to a stable power supply and lay out traces
following fire safety standards.
⚫
Please avoid touching the pins of the module directly in case of damages caused by ESD.
⚫
Do not insert/remove a SIM card or memory card into/from the module while it is not powered
off.
To Next Page
Loading...