Neoway N715-EA - Table 7-3 RF RX Sensitivity of N715-EA

N715-EA Hardware User Guide
Chapter 7 RF Characteristics
Copyright © Neoway Technology Co., Ltd. All rights reserved.
74
FDD-LTE B5
23 dBm±2 dB
<-40 dBm
FDD-LTE B7
23 dBm±2 dB
<-40 dBm
FDD-LTE B8
23 dBm±2 dB
<-40 dBm
FDD-LTE B20
23 dBm±2 dB
<-40 dBm
FDD-LTE B28
23 dBm±2 dB
<-40 dBm
TDD-LTE B38
23 dBm±2 dB
<-40 dBm
TDD-LTE B40
23 dBm±2 dB
<-40 dBm
TDD-LTE B41
23 dBm±2 dB
<-40 dBm
EGSM900
33 dBm±2 dB
5 dBm±5 dB
DCS1800
30 dBm±2 dB
0 dBm±5 dB
Table 7-3 RF RX sensitivity of N715-EA
Band
Receiving sensitivity
FDD-LTE B1
≤ -97 dBm
FDD-LTE B3
< -97 dBm
FDD-LTE B5
≤ -97 dBm
FDD-LTE B7
≤ -96 dBm
FDD-LTE B8
≤ -97 dBm
FDD-LTE B20
< -97 dBm
FDD-LTE B28
≤ -97 dBm
TDD-LTE B38
≤ -97 dBm
TDD-LTE B40
≤ -97 dBm
TDD-LTE B41
≤ -97 dBm
EGSM900
≤ -108 dBm
DCS1800
≤ -107 dBm
The preceding indicators are tested in a shielded environment in the laboratory. The LTE band indicators are the
test results when the bandwidth is 10 MHz, the modulation mode is QPST and RB is set according to the
protocol. On no-shielded environments, deviations may exist in the receiver sensitivity of some individual bands
due to the interference.