Netafim NMC PRO CLIMATE - Page 75

NMC-PRO
USER GUIDE
Doc. Name: NMC-PRO ׀ User Guide Ver 3.05.03 Revision: 2.2 Page: 75
Crop Management Technologies
IMPORTANT: Verify that the SETUP parameters have been
defined for air circulation!
# Parameter Explanation Unit/Range Default
1. Period
It is possible to divide the day up
to 6 periods. You can decide if
the period is On/Off.
On/Off On
2. Active
Updated by the controller
(For indication only)
Yes/No
3. Start Time
Start Time of the period. In case
of overlapping, the next period’s
Start Time overrides the previous
period.
hh:mm 06:00
4. End Time
The air circulation program is
active only within the set period.
hh:mm 10:00
5.
Valid Condition
number
The number of conditions that
are required to be true in order
for the air circulation to operate.
Possible conditions: Temp,
Humidity, Temp difference,
and/or Humidity difference
1-4 1
1.6 Air circ. Prg.
Zone 1
19/01/09 16:21
1. Period
2. Active
3. Start time hh:mm
4. End time hh:mm
5. Valid conditions no.
6. Temp limit °C
7. Temp dead band °C
8. Hum. Limit %
1
Yes
No
06:00
10:00
1
25.0
3.0
70
2
Off
No
Calculation/Status
14. Air circulation status
15. Limitation
No
None