c. Select Tools > Execute Script.
d. Type one of the following commands in the text box.
For controller A: set controller [a] availability=online;
For controller B: set controller [b] availability=online;
e. Select Tools > Verify and Execute.
The system places the controller online.
3.
When the controller is back online, confirm that its status is Optimal, and check the controller
shelf’s Attention LEDs.
If the status is not Optimal or if any of the Attention LEDs are on, confirm that all cables are
correctly seated, and check that the battery and the controller canister are installed correctly. If
necessary, remove and reinstall the controller canister and the battery.
Note: If you cannot resolve the problem, contact technical support.
4.
Collect support data for your storage array using SANtricity System Manager.
a. Select Support > Support Center > Diagnostics.
b. Select Collect Support Data.
c. Click Collect.
The file is saved in the Downloads folder for your browser with the name support-data.7z.
Result
Your battery replacement is complete. You can resume normal operations.
Batteries |
17
To Next Page
Loading...
