Attention LED. If this LED displays as Solid amber, then the fan has a fault.
After you finish
Go to
Remove failed power canister and install new one
on page 48.
Remove failed fan canister and install new one
You remove a failed fan canister so you can replace it with a new one.
Before you begin
• If you do not turn off the power to your storage array, ensure that you remove and replace the fan
canister within 30 minutes to prevent the system from overheating.
• You have an ESD wristband, or you have taken other antistatic precautions.
Steps
1. Unpack the new fan canister, and place it on a level surface near the shelf.
Save all packing material for use when returning the failed fan.
2. Press the orange tab to release the fan canister handle.
48
| Maintaining E5700 Hardware
To Next Page
Loading...
