3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in.The user name and password are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > Security > MAC ACL.
The previous figure shows some examples. Devices in the Trusted Stations table are manually added,
imported, or both added and imported. Devices in the Available Stations table are automatically detected
by the access point, but you can also manually add devices to this table (see Step 7). All devices in the
Available Stations table are common to Group 1 and Group 2, which allows you to add a device to both
groups.
By default, Group 1 is selected. Group 1 is the first MAC ACL.
5. To select Group 2 (which is the second MAC ACL), scroll down and click the > Group 2 link.
6. To change the name for Group 1 or Group 2, enter a new name in the Group Name field.
The default name for Group 1 is Corporate.The default name for Group 2 is Guest.
7. To manually add a device to the Available Stations table, do the following:
a. Enter the MAC address in the format 00-00-00-00-00-00 in the field below the Available Stations
table.
b. Click the Add button.
The device is added to the Available Stations table.
8. Compose the ACL in the following way:
Manage Access and Security
70
Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
To Next Page
Loading...
