21. Playback software
21.1 Obtaining the Playback software
- The Playback software can be found on the USB-card enclosed to the hard copy version
of this manual. Please note that the Playback software version on the USB-card may not
be the most recent software version since a new version can be released as from the
moment the manual and USB-card are sent out. In case another software version is
required than provided on the USB-card, the 2 following options are left.
- The Playback software can be downloaded from the VDR (software is present on Core
Module). Connect your PC to the data-port of the Switch. Open an internet browser and
type the following address ‘172.16.8.2’ (IP-address of Core Module). The Playback
software can be downloaded on this page.
- The playback software can be downloaded from www.oroliamaritime.com - login (only
accessible for service engineers).
Additional playback software, which may be downloaded from the Netwave website is available
for use in shore-side offices. This additional software is necessary for the playback of data once
it has been removed from the ship and transported to the office environment.
The computer on which the Playback application is being installed must have its regional and
language options adjusted to English. This may be done by double clicking the ‘Regional
Options’ icon in the Control Panel window and selecting ‘English’ from the language drop
down list. It is recommended that either ‘English (United States)’ or ‘English (Canada)’ is
selected. However, any of the available English options are acceptable.
21.2 Installation of Playback software - Client/Standalone PC
The installation of playback software is automated and requires little interaction. The install is
performed via a self-extracting executable file and is automatically installed to the C:\Program
Files\Netwave\VDR directory, with a shortcut placed on the Windows desktop. The install file will
normally be named “Install VDR Playback.exe”.
To begin the installation, complete the steps listed below.
1. Double click the file ‘Install VDR Playback.exe’.
2. Choose the directory to which the executable will be installed.
3. Perform the installation.
To Next Page
Loading...