5.2 Obtaining the Playback software
The Playback software can be found on the USB-card enclosed to the hard copy version of this
manual. Please note that the Playback software version on the USB-card may not be the most
recent software version since a new version can be released as from the moment the manual and
USB-card are sent out.
In case another software version is required than provided on the USB-card, the 2 following
options are left.
- The Playback software can be downloaded from the VDR (software is present on Core
Module). Connect your PC to the data-port of the Switch. Open an internet browser and
type the following address ‘172.16.8.2’ (IP-address of Core Module). The Playback
software can be downloaded on this page.
- The playback software can be downloaded from www.oroliamaritime.com - login (only
accessible for service engineers).
Additional playback software, which may be downloaded from the Netwave website is available
for use in shore-side offices. This additional software is necessary for the playback of data once it
has been removed from the ship and transported to the office environment.
The computer on which the Playback application is being installed must have its regional
and language options adjusted to English. This may be done by double clicking the
‘Regional Options’ icon in the Control Panel window and selecting ‘English’ from the
language drop down list. It is recommended that either ‘English (United States)’ or ‘English
(Canada)’ is selected. However, any of the available English options are acceptable.
To Next Page
Loading...
