Grease the 4 bolts of the junction box from top to bottom with some of the remaining silicone
grease from the TRON 40VDR. This will prevent corrosion of the bolts and will enable the next
engineer to open the junction box without replacing it. Some copper slip or other water dispersing
formula can also be used.
11.5 (Led) indicators on docking module
Below is a description of the LED lights on the Docking Module (83180 MKII).
11.6 Warnings
If warnings occur these will be indicated on the display of the Bridge Control Unit.
11.7 Operating instructions
After commissioning of the VDR system, this unit does not require (crew) operating instructions.
To Next Page
Loading...
