NetWave NW6000 - Configuring the Opt

Page 135/ 191
19.4.3 Configuring the OPT
Select the OPT Configuration button to configure Operational Performance Test for NMEA,
Audio and Video sources.
Add categories for groups of NMEA OPT items.
Dragging or double
clicking the NMEA
sources will add that
item to the currently
selected category.
OPT categories will
become visible on
the BCU once the
OPT is performed
(see example
underneath).
Once the system is
completely configured then the OPT configuration will be saved with ‘save to VDR’.