10.28 VCS2 Menu Overview
This section provides an overview of the menu items available in the Video Diagnostics
application.
▪ File Menu
o Load Bitmap: Selecting this option opens a file selection window from which a
user must choose a saved bitmap file to load to the Image window for viewing.
o Save Bitmap: This will save the current image to a bitmap file.
o Save Histogram: This will save the Histogram from the Info page to a CSV file
(Comma Separated Value file).
o Save Cross-Section: This will save the cross-section of pixel data indicated by
the dashed red line in the Capture window to a CSV file.
o Exit: This will exit the application.
▪ View Menu
o Zoom In: Zooms into the image.
o Zoom Out: Zooms out of the image.
o Fit to Window: Will cause the image the edges of the image to fill to the edges of
the Image window.
o Full Screen: This sets the Video Configuration Utility to Full-Screen mode. Right
click on the image in Full-Screen mode to access the menu.
▪ Toolbar
o Load: Load a bitmap, same as File->Load Bitmap.
o Pan Tool: Activate the Panning tool for the Image Window. This is the default.
o Eyedropper Tool: Activate the Eyedropper tool to choose a pixel and get the
value.
o ZoomBox Tool: Activate the ZoomBox tool, which lets the user select an area to
zoom.
o Zoom 1:1: Zooms to the original scale of the image.
o Zoom In: Increase the zoom magnification.
o Zoom Out: Decrease the zoom magnification.
o Fit to Window: Display the full image in the window.
o Fullscreen: Toggle between full screen mode and other views.
o Freeze Image: Toggle Freeze mode to freeze the current image, do not load any
new images from the capture sequence.
To Next Page
Loading...
