Newport MM4005 - Page 279

EDH0162En1040 – 06/99 3.196
MM4005 YQ — Set current position in variable
Usage  IMM  PGM  MIP
Syntax xxYQnn
Parameters
Description xx
[int] — Axis number.
nn [int] — Float variable.
Range xx — 1 to 4.
nn
— 101 to 120.
Units xx
— None.
nn — None.
Defaults xx Missing: Error B.
Out of range: Error B.
nn Missing: Error C.
Out of range: Error C.
Description This command sets the current position in the desired Y float variable.
Returns None.
Errors B — Incorrect axis number.
C — Parameter out of limits.
Rel. Commands YP — Set theoretical position in Y variable.
Example
2YQ110
| Set the current position of the axis #2 in the float variable #110.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com