SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
Figure 83 – Monitoring ACM Controller status
The Demodulator table shows an overview of the last received ACM feedback
messages from the different ACM clients. In this case, the ACM client is located on
modem B with management address 192.168.255.187. The last received EsNo
and Requested ModCod are displayed in the table as well as a counter showing
the total amount of received feedback messages so far. (Num rx value).
Monitoring the ACM client
Go to:
EL470 >>modem>> Monitor >> Demodulation >> ACM client
Figure 84 – Monitoring ACM Client status
The ACM client config shows the latest ACM client config message received
from the ACM controller, this message is send via the signalling channel:
The ACM poll shows the latest poll message received from the ACM controller,
this message is send via the signalling channel;
The ACM feedback shows the latest ACM client feedback string sent to the
ACM controller;
Again ACM log, ACM logs today and ACM logs yesterday provide a link to
the appropriate log files of the received ACM client config messages.
To Next Page
Loading...
