NMC-WOLLARD 140 - Alarms Menu; Figure 1-10: Alarms Menu Functions

NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M140 Tow Tractor Manual No. 46054
PAGE 5-104
CHAPTER 5 MANUFACTURER’S INFORMATION
12
NexSysLink
®
2" Stand-Alone CAN Display Operation Manual  SAE J1939
© 2011 Beede Electrical Instrument Co., Inc.
• Alarms Menu
The Main Menu-Alarms function allows users to enable alarm notication, view the parameter or
parameters causing the alarm, edit existing alarms and add new alarms�
Figure 1-10: Alarms Menu Functions
View Alarms
Alarms-Enabled
Mute Audio Alarm
Alarms
Alarms-Enabled (Disabled)
View Alarms
Edit Alarms
Return
Exit
Alarms Menu Function List.
Note: Pressing the Enter switch toggles between
Alarms Enabled and Alarms-Disabled.
The Alarms menu appears with the selection arrow
cursor next to the Alarms-Enabled or Disabled option.
Scroll down to view all Alarms menu functions.
From the Main Menu, scroll to place the selection
arrow cursor next to the Alarms option.
Press the Enter switch to open Alarms menu.
Alarm Menu function Summary:
Alarms-Enabled - Turns on all set alarms�
Alarms-Disabled - Turns o all set alarms�
View Alarms - Allows users to view all set alarm congurations�
Edit Alarms - Allows users to edit existing alarms, add new alarms or delete existing alarms�
Return - Brings users back to the Alarms option of the Main Menu�
Exit - Brings users back to the last displayed CAN parameter screen
CAN DISPLAY MANUAL
OCTOBER 01, 2015