NMC-WOLLARD 140 - Figure 1-16: Menu Prompt Sequence with Previously Configured Alarms

NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M140 Tow Tractor Manual No. 46054
PAGE 5-109
CHAPTER 5 MANUFACTURER’S INFORMATION
17
NexSysLink
®
2" Stand-Alone CAN Display Operation Manual  SAE J1939
© 2011 Beede Electrical Instrument Co., Inc.
Figure 1-16: Menu Prompt Sequence with Previously Congured Alarms
Return
Add Alarm
Change? 10.0 V
A1 Alternator Volts
Return
Edit Alarms
View Alarms
Alarms-Enabled
Mute Audio Alarm
Alarms
Press the Enter switch to add a new alarm or select
Return to bring back the Edit Alarms menu option.
When a previously congured alarm or alarms exists,
they will appear after selecting Edit Alarms.
Scroll down thru all the previously congured alarms
to reach the Add Alarm menu function.
With the selection arrow cursor next to the Edit Alarms
option, press the Enter switch to begin editing alarms.
The Alarm menu appears with the selection arrow
cursor next to the Alarms-Enabled or Disabled option.
Scroll down to place selection arrow cursor next to
Edit Alarms option.
From the Main Menu, scroll to place the selection
arrow cursor next to the Alarms option.
Press the Enter switch to open Alarms Menu.
CAN DISPLAY MANUAL
OCTOBER 01, 2015