Configure a Beacon G6
Network configuration
Configuring TR-069
2
Configure the following parameters:
a. Select the DNS proxy toggle button to enable the DNS proxy and click Save.
b. Configure the following:
1. Enter the domain name in the Domain Name field
2. Enter the domain IP address in the IPv4 address field.
3. Click Add.
c. Configure the following:
1. Enter the origin domain name in the Origin Domain field
2. Enter the new domain name in the New Domain field.
3. Click Add to associate an origin domain with a new domain.
The Static DNS entries table displays the configured domain names and the associated IPv4
address.
END OF STEPS
7.24 Configuring TR-069
1
Click Network→TR-069 in the left pane. The TR-069 page displays.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 101
To Next Page
Loading...
