Nokia Beacon G6 - 7.11 Viewing STA Information; Table 7-4 WAN Status Ipv6; Table 7-5 STA Information Parameters; Figure 7-7 STA Information Page

Configure a Beacon G6
Viewing device information and status
Viewing STA information
Beacon G6
Table 7-4 WAN status IPv6 parameters (continued)
Field
Description
Ethernet link status
Indicates whether the Ethernet link is up or down.
Tx packets
Indicates the number of packets transmitted on the WAN connection.
Rx packets
Indicates the number of packets received on the WAN connection.
Tx dropped
Indicates the number of transmitted packets dropped on the WAN connection.
Rx dropped
Indicates the number of received packets dropped on the WAN connection.
Err packets
Indicates the number of error packets on the WAN connection.
END OF STEPS
7.11 Viewing STA information
1
Click Status→STA information in the left pane. The STA information page displays the
following information.
Figure 7-7 STA information page
Table 7-5 STA information parameters
Field
Description
MAC address
Indicates the MAC address of the Ethernet connection.
SSID name
Indicates the name of each SSID.
Channel
Indicates the channel number.
Connection duration
Indicates the connection duration.
Wi-Fi mode
Indicates the Wi-Fi mode.
RSSI (dBm)
Indicates the received signal strength.
END OF STEPS
June 2022
Issue 1
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 75