ETSI CPE safety guidelines
Electrical safety guidelines
2.4 Electrical safety guidelines
This section provides the electrical safety guidelines for the customer premises equipment.
Note: The devices comply with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences between the local and U.S. standards.
The devices comply with BS EN 61140.
2.4.1 Power supplies
The use of any non-Nokia approved power supplies or power adapters is not supported or
endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use
greatly increases the danger of damage to equipment or property.
2.4.2 Cabling
The following are the guidelines regarding cables used for the customer premises equipment:
• All cables must be approved by the relevant national electrical code.
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 25
To Next Page
Loading...
