Configure a Beacon G6
Application configuration
Configuring port triggering
Table 7-28 Port forwarding parameters (continued)
Select the port forwarding protocol from the list:
• TCP
• UDP
• TCP/UDP
Select a WAN connection from the list. Only active devices are displayed in the list.
3
Click Save.
END OF STEPS
7.41 Configuring port triggering
1
Click Application→ Port triggering in the left pane. The Port triggering page displays.
Figure 7-42 Port triggering page
Use subject to agreed restrictions on disclosure and use.
132 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
