Nokia Beacon G6 - Configuring DMZ and ALG; Figure 7-48 DMZ and ALG Page

Configure a Beacon G6
Security configuration
Configuring DMZ and ALG
Beacon G6
Table 7-34 URL filter parameters (continued)
Field
Description
URL filter type
Select a URL filter type from the list:
• Block
• Allow
URL address
Enter the URL address.
Port number
Enter the port number.
Default value: 80
Allowed values: <>
3
Click Add filter+ to add the URL filter.
END OF STEPS
7.48 Configuring DMZ and ALG
1
Click Security→ DMZ and ALG in the left pane. The DMZ and ALG page displays.
Figure 7-48 DMZ and ALG page
June 2022
Issue 1
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 141