4 ANSI CPE safety guidelines
4.1 Overview
4.1.1 Purpose
This chapter provides information about the mandatory regulations that govern the installation and
operation of devices in the North American or ANSI market.
4.1.2 Contents
4.1 Overview
4.2 Safety instructions
4.3 Safety standards compliance
4.4 Electrical safety guidelines
4.2 Safety instructions
This section describes the safety instructions that are provided in the CPE customer documentation
and on the equipment.
4.2.1 Safety instruction boxes in customer documentation
The safety instruction boxes are provided in the CPE customer documentation. Observe the
instructions to meet safety requirements.
The following is an example of the Danger box.
DANGER
Hazard
Possibility of personal injury.
The Danger box indicates that the described activity or situation may pose a threat to personal
safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to,
may result in death or serious physical harm.
Do not proceed beyond a Danger box until the indicated conditions are fully understood and met.
The following is an example of the Warning box.
Use subject to agreed restrictions on disclosure and use.
Issue 1 3FE-49949-AAAA-TCZZA 31
To Next Page
Loading...
