Configure a Beacon G6
Network configuration
Configuring TR-069
Figure 7-22 TR-069 page
2
Configure the following parameters:
Table 7-16 TR-069 parameters
Select the toggle button to enable periodic inform updates.
Periodic inform interval(s)
Enter the time between periodic inform updates, in seconds.
Enter the URL of the auto-configuration server.
Enter the username to log in to the Beacon.
Enter the password to log in to the Beacon.
Enter the username to log in to the auto-configuration server.
Enter the password to log in to the auto-configuration server.
Use subject to agreed restrictions on disclosure and use.
102 3FE-49949-AAAA-TCZZA
To Next Page
Loading...
