EasyManua.ls Logo

Nokia Beacon G6 - Table 2-2 Safety Labels

Nokia Beacon G6
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beacon G6
2.3.1 EMC, EMI, and ESD compliance
The customer premises equipment complies with the following EMC, EMI, and ESD requirements:
EN 300-386 V1.6.1: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC) requirements;
Electrostatic Discharge (ESD) requirements
EN 301489-1: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC) Standard for
Radio Equipment and Servcies; part 1: Common Technical Requirements
EN 301489-17: Electromagnetic Compatibility and Radio Spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) Standard for Radio Equipment; Part 17: Specific
Conditions for Broadband Data Transmission Systems.
Radio Equipment Directive (RED) 2014/53/EU (applicable from 13 June 2016)
EN 55032 (2015): Electromagnetic compatibility of multimedia equipment - Emission
Requirements
EN 55024 (2010): Information Technology Equipment, Immunity Characteristics, limits and
methods of measurement
Electromagnetic Compatibility (EMC) directive 2014/30/EU
European Council Directive 2004/108/EC
Low Voltage (LVD) directive 2014/35/EC
2.3.2 Equipment safety standard compliance
The customer premises equipment is labeled with specific safety compliance information and
instructions that are related to a variant of the CPE. Observe the instructions on the safety labels.
Table 2-2, Safety labels” (p. 23) provides examples of the text in the various CPE safety labels.
Table 2-2 Safety labels
Label text
Description
TUV compliance
Type 3R enclosure - Rainproof.
ESD warning
Caution: This assembly contains electrostatic sensitive device.
CDRH compliance
Complies with 21 CFR 1040.10 and 1040.11.
CE marking
There are various CE symbols for CE compliance.
UKCA marking
There is UKCA symbol for UKCA compliance.
Figure 2-1, “Sample safety labels” (p. 24) shows a sample safety label located on the bottom of the
Beacon G6.
June 2022
Issue 1
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 23

Table of Contents

Related product manuals