Configure a Beacon G6
Maintenance
Upgrading firmware
Figure 7-31 Backup and restore page
2
Click Select and select the previously backed-up configuration file.
3
Click Import to import the configuration file and restore the Beacon to the backed-up
configuration.
A confirmation message displays after successful restore and the Beacon reboots.
END OF STEPS
7.32 Upgrading firmware
1
Click Maintenance→ Firmware upgrade in the left pane. The Firmware upgrade page
displays.
Use subject to agreed restrictions on disclosure and use.
118 3FE-49949-AAAA-TCZZA