Nokia Beacon G6 - Configuring NTP; Table 7-26 DDNS Parameters

Configure a Beacon G6
Application configuration
Configuring NTP
Beacon G6
2
Configure the following parameters:
Table 7-26 DDNS parameters
Field
Description
WAN connection list
Select a WAN connection from the list.
Enable DDNS
Select the toggle button to enable DDNS on the WAN connection.
ISP
Select an ISP from the list.
Domain Name
Enter the domain name of the DDNS server.
Username
Enter the username.
Password
Enter the password.
3
Click Save.
END OF STEPS
7.39 Configuring NTP
1
Click Application→ NTP in the left pane. The NTP page displays.
June 2022
Issue 1
Use subject to agreed restrictions on disclosure and use.
3FE-49949-AAAA-TCZZA 129